manualshive.com logo in svg

Canon VIXIA HF M30, Quick Manual

Share
Download
Canon VIXIA HF M30 Quick Manual Download Page 194

External Connections

 

Š

 139

4 Connect the camcorder to the DW-100 DVD Burner and create the 

disc.

The procedure is the same as that for burning AVCHD discs (

0

132). 

To play back standard-definition DVDs

Standard-definition DVDs are created using DVD-Video specifications. 
Play back these DVDs using standard DVD players. 

NOTES

• When the camcorder contains a large number of scenes to be saved on 

discs, it may take a long time for the connection to the DVD Burner 
(

0

132, step 2) to be completed. For best performance, we recom-

mend limiting the number of scenes to be saved to 500 or fewer 
scenes.

• Standard-definition DVDs cannot be played back using the DW-100 

DVD Burner.

Saving Photos on Photo DVDs

Using the optional DW-100 DVD Burner you can save your photos on a 
Photo DVD. The Photo DVD will contain all your photos as JPG files as 
well as a slideshow of all the photos, each displayed for about 3 sec-
onds, with the selected background music (

0

89).

Refer to this section along with the relevant sections in the instruction 
manual of the DW-100.

 Carefully read the information in 

SDXC Memory Cards

 (

0

37) 

before performing the procedure using recordings made on an SDXC 
memory card.

1 Power the camcorder using the compact power adapter. 

2 Open the [Photos] index screen.

3 Connect the camcorder to the DW-100 DVD Burner and create the 

disc.

The procedure is the same as that for burning AVCHD discs (

0

132). 

Operating modes:

Summary of Contents for VIXIA HF M30



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands