manualshive.com logo in svg

Canon VIXIA HF M30, Quick Manual, Page: 544 / 562

Share
Download
Canon VIXIA HF M30 Quick Manual Download Page 544

152

My camcorder is not recognized by the computer.

Check the following:

Have you installed ImageMixer 3?
Have you turned on the camcorder?
Is the camcorder powered using the compact power adapter?
Is the USB cable connected to the computer properly?

If the USB cable is connected properly and is not recognized, connect to another USB port of the 
computer.

Disconnect  the  USB  cable,  then  restart  the  computer  and  reconnect  the  camcorder  with  the 
computer following the correct procedure.

Disconnect any USB devices other than the camcorder, keyboard, and mouse.

If the camcorder is connected via a USB hub, connect the camcorder directly to the computer.

If software is running in the background, exit them and connect the camcorder again.

Some items cannot be used in ImageMixer 3 Launcher.

You cannot select some buttons unless you connect the camcorder to the computer. Connect the 
camcorder to the computer to use these functions. (P.16)

A progress dialog box is displayed and the reading takes time.

The progress dialog box is displayed when reading the files imported from the camcorder that have 
not been read in the ImageMixer 3 Library. It may take time when there are many files which have not 
been read in the Library. You can skip the reading by clicking [Cancel]. In this case, reading can be 
resumed by clicking the [Video file management & edit] again. Only the files which have been read are 
added to the Library.

•
•
•
•

Summary of Contents for VIXIA HF M30



















































































































































































































































































































































































































































































































































































Reviews:

No comments