manualshive.com logo in svg

Canon VIXIA HF M30, Quick Manual

Share
Download
Canon VIXIA HF M30 Quick Manual Download Page 165

110 

Š

 

Photos

Options

(



 

Default value)

Continuous Shooting/Hi-Speed Continuous Shooting 

1 Press 

j

 halfway to activate the autofocus.

2 Press 

j

 fully and hold it pressed down.

Auto Exposure Bracketing 

Press 

j

, first halfway to activate the autofocus and then fully to 

record the 3 photos.

NOTES

• Continuous shooting speeds are approximate and vary depending on 

recording conditions and subjects.

• When the flash is used, continuous shooting speed will decrease to 

approx. 2.1 photos/second. Continuous shooting speed will decrease 
also when using slow shutter speeds (1/30 or slower).

Taking Photos while Recording Movies (Simultaneous Recording)

You can record photos even while the camcorder is set to 

 mode. 

Moreover, you can capture the photo at the same time you are record-
ing video. Photos recorded with simultaneous recording will have the 
same aspect ratio of movies (16:9).
Please read the IMPORTANT section (

0

111) before using an Eye-Fi 

card.

[

A

 Single]



Records a single photo.

[

D

 AE Bracketing]

The camcorder records 3 photos using 3 dif-

ferent exposures (dark, normal, light in 1/2 EV steps), allowing 
you to choose the photo you like the best.

[

B

 Continuous], [

C

 Hi-Speed Cont.]

Captures a series of up to 60 photos as long as you hold 

j

 

pressed down. There are two continuous shooting speed set-
tings: normal (approx. 3 photos/second) and high speed (approx. 
5 photos/second).

Operating modes:

Summary of Contents for VIXIA HF M30



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands