manualshive.com logo in svg

Canon VIXIA HF M30, Quick Manual, Page: 172 / 562

Share
Download
Canon VIXIA HF M30 Quick Manual Download Page 172

Photos

 

Š

 117

Printing Photos

Printing Photos (Direct Print)

The camcorder can be connected to any PictBridge-compatible 
printer. You can mark in advance the photos you want to print and set 
the desired number of copies as a print order (

0

119).

Canon printers:

 SELPHY printers of the CP, 

DS and ES series and PIXMA printers carry-
ing the PictBridge logo.

Connecting the Camcorder to the Printer

1 In single photo view, select a photo you want to print.

2 Turn on the printer.

3 Connect the camcorder to the printer using the supplied USB 

cable.

• Connection 

D

. Refer to 

Connection Diagrams

 (

0

124).

• If the device selection screen appears, touch [Computer/Printer]. 
•

V

 appears and changes to 

D

.

IMPORTANT

• If 

V

 continues to flash (for more than 1 minute) or if 

D

 does not 

appear, the camcorder is not correctly connected to the printer. In such 
case, disconnect the USB cable and turn off the camcorder and the 
printer. After a short while, turn them on again, set the camcorder to 

 mode and restore the connection.

• During the following operations, even if you connect a printer to the 

camcorder it will not be recognized.
- Deleting all photos
- Removing all print orders

NOTES

•

 will appear for photos that cannot be printed. 

• We recommend powering the camcorder using the compact power 

adapter.

Operating modes:

Summary of Contents for VIXIA HF M30



















































































































































































































































































































































































































































































































































































Reviews:

No comments