Canon VB-S800VE Operation Manual Download Page 122

Page: 122 / 238

122

(4)

Full-View Screen

Displays the full video obtained by the camera when starting [Preset Tour].

(a)

Preview Frame (Blue Frame)

Indicates the current camera angle in the video display area

(b)

Preset Preview Frame (White Frame)

Indicates the preset/home position that is currently selected.

Tour Route Settings

The number of presets that can be toured per route is maximum 20 presets.

[Effective Conditions]

Select the conditions to perform a preset tour.

[Not used]

Preset tour is not performed.

[Viewers Connected]

Preset tour is performed when a Viewer is connected to the camera.

[Always]

Preset tour is always performed.

Note

When [Not used] is selected, the following preset tour route settings cannot be configured.

[Specify Active Time]

Select [Specified] to configure a preset tour at a predetermined time, and enter the start time and end time for the

preset tour.

If [Viewers Connected] is set for [Effective Conditions], the preset tour operates when the Viewer is connected to

the camera at the tour start time. If [Always] is set for [Effective Conditions], the preset tour always operates.

You can select multiple presets.

(a)

(b)

Specify the settings for tour route usage.

Click [Add] in [Edit Tour Route].

Select a preset to tour from the [Preset List].

Summary of Contents for VB-S800VE















































































































































































































































Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands

Canon VB-S800VE, Operation Manual

Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands