Canon VB-S800VE Operation Manual Download Page 149

Page: 149 / 238

Sett

ing Page

149

You must register the sound clip with Sound Clip Upload 1 to 3 (P. 133) in [Video and Audio] > [Audio] in advance.

[Volume]

Enter the volume for the sound clip.

[Switch Day/Night]

Select the Day/Night Mode switching behavior when an external device input event is triggered.

When [Switch to Day Mode] is set, switches to Day Mode when an active event is triggered, and switches to Night Mode

when an inactive event is triggered.

When [Switch to Night Mode] is set, switches to Night Mode when an active event is triggered, and switches to Day Mode

when an inactive event is triggered.

Important

• When [Camera] > [Initial Setting] > [Day/Night] is set to [Auto] (P. 109), [Switch Day/Night] will not happen when an external device

input event is triggered.

• When the [Switch Day/Night] settings switch Day/Night Mode, camera control privileges are released, even if the user has obtained

those camera control privileges using the Camera Viewer or other camera control applications.

Summary of Contents for VB-S800VE















































































































































































































































Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands

Canon VB-S800VE, Operation Manual

Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands