Canon VB-S800VE, Operation Manual

Page: 74 / 238

74
Open the [Video and Audio] menu to set the audio reception from the camera, the audio transmission from the Viewer and
the corresponding volumes.
Receiving Audio
Receive audio from the built-in microphone and play it back in the Viewer.
Audio reception starts.
The [Audio Reception] button icon will change to active (purple) while receiving audio.
Note
• To receive audio, you must set [Video and Audio] > [Audio] > [General Sound] > [Audio Input] to [Enable] (P. 132) and set [Video
and Audio] > [Audio] > [Audio Server] > [Audio Transmission from the Camera] to [Enable] (P. 133) on the Setting Page.
• While the icon is active (purple), audio is constantly received even if you close the [Video and Audio] menu.
However, even if the icon is active (purple), audio input from the microphone will not be received because there is no sound sent
from the camera in the following cases.
– While the camera is performing a pan/tilt operation when [Mute During Pan/Tilt] is set to [Mute] in [Video and Audio] > [Audio]
> [General Sound] on the Setting Page (P. 133)
– While the administrator is transmitting audio when [Audio Communication Method] is set to [Half Duplex] in [Video and Audio]
> [Audio] > [General Sound] on the Setting Page (P. 133)
• To use the audio function in environments that use a proxy server, select [Use a proxy server for your LAN] in [Network and
Internet] > [Internet options] > [Connections] tab > [LAN settings] > [Proxy server] in [Control Panel], then specify the camera IP
address in [Advanced] > [Exceptions].
Transmitting Audio
You can transmit audio received from an external device connected to the computer to a speaker with an amplifier
connected to the camera.
Receiving/Transmitting Audio
1 In the [Video and Audio] menu, click the [Audio Reception] button.
2
In [Output Volume], adjust the volume to an appropriate level using the slider.
S30VE
1
In the [Video and Audio] menu, select the maximum audio transmission time.