Canon VB-S800VE, Operation Manual

Page: 109 / 238

Sett
ing Page
4
109
Note
• When [Auto] or [Manual] is selected for [Haze Compensation], the video data size may increase.
• If using [Haze Compensation] causes a strong difference in video brightness, set [Haze Compensation] to [Manual] and set [Haze
Compensation Level] weaker.
[Haze Compensation Level]
When Haze Compensation is set to [Manual], set the compensation level.
[Day/Night]
Select a capture mode according to the brightness of the installation environment.
[Auto]
The camera automatically determines ambient brightness and switches to Day Mode or Night Mode.
[Day Mode]
Captures normal color video.
[Night Mode]
Video turns to monochrome.
Important
[Haze Compensation] cannot be used if [Smart Shade Control] is set to [Auto] or [Manual].
Important
• If you use [Auto], conduct a thorough operation test beforehand to check the effectiveness of the setting.
• When [Auto] is selected, set [Exposure] to [Auto], [Auto (Flickerless)], [Auto (Flickerless2)] or [Auto (Shutter-priority AE)]. However
even if you set [Day/Night] to [Auto], the night mode may not be enabled, depending on the shutter speed when [Auto (Shutter-priority
AE)] is set.
• If you exit the Viewer while [Day Mode] or [Night Mode] is set, these will remain in effect, even if [Day/Night] is set to [Auto].
To enable [Auto] Day/Night Mode, set [Day/Night] to [Auto] before exiting the Viewer.
• The camera is equipped with an IR-cut filter, but infrared illumination is not possible because the camera does not have a feature
enabling it to swap the filter.