Canon VB-S800VE Operation Manual Download Page 200

Page: 200 / 238

200

You can update the firmware.

Device Information

[Model Name], [Firmware Version]

Displays the information about the connected camera.

Updating Firmware

Configure the settings related to firmware updates.

[Restore Default Settings]

The initial settings are restored when the firmware is updated.

If you set this to [Restore], the following settings are retained when initializing.

• Administrator Name

• Password

• Network Settings

• Time Zone

• Certificates

• Private Key

[Update Firmware]

Click [Browse], specify a firmware file for update, and click [Exec]. When the confirmation message is displayed, click [OK]

to start the firmware update.

The camera is rebooted after the firmware is updated.

[Maintenance] > [Update Firmware]
Updating the Camera Firmware

Caution

You must not turn off the camera while it is performing the [Update Firmware] operation. Turning off the camera at this

stage may result in disabling its ability to boot correctly.

The following settings can be configured here.

• Update Firmware

Summary of Contents for VB-S800VE















































































































































































































































Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands

Canon VB-S800VE, Operation Manual

Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands