Canon VB-S800VE, Operation Manual

Page: 104 / 238

104
[Digital PTZ Position]
Register the current digital PTZ position as the initial setting.
If you select [Register], a yellow frame is displayed in the video display area. Operate the frame to specify the Digital PTZ
trim position during startup.
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 69).
Camera Settings
Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the
recommended settings as required and click [Apply].
[Focus]
Selects the focus.
[Auto]
Automatically adjusts the focus.
[Manual]
You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions.
When you click [Exec] in [One-shot AF], the camera will focus once using autofocus and then switch to manual mode.
[Fixed at infinity]
You can set the focus so that it is fixed near infinity.
Type Motion Priority Low Light Visibility Data Size Reduction Standard Setting
Usage scenario
Reduces vibrations
for moving subjects.
Brightens by raising
the sensitivity for
dark subjects. Reduces the data
size in low-light
conditions.
Cancels the scenario
settings and restores
the factory default
settings.
[Exposure] Auto Auto Auto Auto
[AGC Limit] 6 6 4 6
[Shutter Speed Limit (Lower)] 1/250 (sec.) 1/8 (sec.) 1/8 (sec.) 1/30 (sec.)
[Shutter Speed Limit (Upper)] 1/16000 (sec.) 1/16000 (sec.) 1/16000 (sec.) 1/16000 (sec.)
[Smart Shade Control] Disable Disable Disable Disable
[Noise Reduction] Mild Strong Strong Standard
[Sharpness] 3 3 3 3
[Color Saturation] 4 4 2 4
[Haze Compensation] Disable Disable Disable Disable
Important
Note the following regarding [Simple Camera Settings].
– [Motion Priority]: In low-light conditions, video may become comparatively darker than [Standard Setting], and noise may increase.
Flickering may occur due to fluorescent lighting, etc.
– [Low Light Visibility]: Residual images may appear for moving subjects in dark situations.
– [Data Size Reduction]: Residual images may appear for moving subjects in dark situations.
S30VE S910F