Canon VB-S800VE Operation Manual Download Page 121

Page: 121 / 238

Sett

ing Page

121

You can have the camera automatically tour multiple registered presets to allow monitoring.

Note

• Preset tour is not performed while the camera control privileges are obtained in the Camera Viewer or the video is displayed on the

Setting Page.

• Preset tour is not performed when control privileges are obtained by RM-Lite.

Screen Composition

The screen composition differs as follows, according to the camera model.

(1)

Tour Condition Settings

Set the conditions for touring (P. 122).

(2)

[Edit Tour Route]

Displays a list of the presets to tour. The presets are toured from the top of the list.

You can change the order of the presets and set the time to stop at the preset positions, etc.

(3)

Video Display Area

Displays the current camera video.

[Camera] > [Preset Tour]
Setting the Preset Tour Route

S800VE

The following settings can be configured here.

• Route

• Edit Tour Route

(1)

(3)

(4)

(2)

Summary of Contents for VB-S800VE















































































































































































































































Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands

Canon VB-S800VE, Operation Manual

Search results

Summary of Contents for VB-S800VE

Reviews:

Related manuals for VB-S800VE

Brands by name

Popular brands