Canon VB-S30D MKII, Operation Manual

Page: 71 / 172

71
S
et
ting P
age
4
Device Information
[Model Name], [Firmware Version], [ S erial Number], [Build
Number], [MAC address]
Displays information about the currently connected
camera.
Tool
(1) [View Logs]
Display a history of camera operations and
connections to each viewer, etc.
(2) [View Current S ettings]
Display a list of current settings.
(3) [Reboot]
The camera is rebooted.
The camera angle will return to the home position. If a
home position has not been registered, the camera
will return to the factory default home position setting.
See p. 90 for details on registering a home position.
(4) [Restore Default S ettings]
Discard user-defined settings and restore all setting
items to factory default settings except camera
administrator password, network setting, date, time,
time zone, SSL certificate, encrypted communications
and host access restrictions. Executing this operation
will reboot the camera automatically.
Note
• It is recommended that you write down all current setting
values before restoring factory default settings in [Restore
Default Settings] (p. 157).
• The camera can be restored to factory default settings using
the reset switch as well. Note, however, that this will reset all
camera settings to factory default settings except for date and
time (p. 156).
[Maintenance]
Viewing Current Settings, Event Logs and Performing Maintenance
The following items can be used here.
• Device Information
Display information about the current device.
• Tool
Display or Initialize Camera Settings
Caution
• You must not turn off the camera while it is
performing the [Restore Default S ettings]
operation. Turning off the camera at this stage
may result in making it unable to boot correctly.