Canon VB-S30D MKII Operation Manual Download Page 126

Page: 126 / 172

126

Changing the Camera Zoom Ratio

Move the knob on the slider up or down to zoom in or out

The camera zoom ratio will change according to the knob

position on the slider. The knob can also be moved by

clicking on an empty part of the slider.

Note

• In the Admin Viewer, you can also control the zoom with the

Camera Control button (p. 133).

• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting

page, the icon for the digital zoom telephoto end is displayed.
(p. 44).

• Zoom refers to digital zoom only.

Change the Zoom Ratio in the Panorama
Display Area

You can change the zoom ratio by dragging the yellow

frame lines in the panorama window and changing the

size of the frame. The zoom ratio will adjust to capture

the area in the changed frame.

Note

• Clicking outside the yellow frame lines and dragging will create

blue frame lines. When you release the mouse button, the blue

lines will turn yellow and the camera will change the pan, tilt

and zoom in order to capture that area.

• Zoom refers to digital zoom only.

Using the Preset/Home Position

You can control the camera using presets and home

position registered in the camera beforehand (p. 88).

Click the preset selection box and select a preset from the

displayed list to go to the selected preset camera angle.

Click the [Home Position] button to move the camera

angle to the home position.

Note

Register presets and home position beforehand using the Preset
Setting Tool (p. 90). Registered presets will appear in the preset

selection box.

Compensating Backlight

This control is effective when the video is dark due to

backlight.

Clicking [BLC] brightens video that is dark due to backlight.

Clicking the button again cancels backlight

compensation.

Cropping and Displaying Part of Video
(Digital PTZ)

You can use the Digital PTZ panel to crop and display

part of a camera video in the video display area. It is also

possible to use a preset or home position registered to the

camera.

Digital PTZ

Digital PTZ is a function that facilitates simple panning,

tilting, and zooming without changing the camera lens

position that was adjusted at the time of installation by

Click the [Panorama Display] button.

Change the zoom ratio in the panorama display area
displayed.

Maximum telephoto
digital zoom

(only when digital zoom is
on)

Maximum telephoto

Slider for zoom

Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)

Maximum Wide Angle

[Home Position] button

Preset selection box

Summary of Contents for VB-S30D MKII













































































































































































Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands

Canon VB-S30D MKII, Operation Manual

Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands