Canon VB-S30D MKII Operation Manual Download Page 26

Page: 26 / 172

Install the following software to perform initial settings for the camera.

• VB Initial Setting Tool: Software required for performing initial camera settings

• Admin Tools Certificate: An electronic certificate that is required for using Admin Viewer and Admin Tools

• .NET Framework 3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not

required if already installed on the computer)

You can perform either an Easy Installation or a Custom Installation of the software.

Note

• All computer users will be able to use Admin Viewer and Admin Tools if the Admin Tools certificate was installed by the installer.

• Select [Custom Installation] and install only the “Admin Tools Certificate” if you intend to use the Admin Viewer and Admin Tools on a

computer other than the one where the VB Initial Setting Tool is installed.

The installation screen appears.

[Easy Installation]: VB Initial Setting Tool and Admin

Tools certificate are installed.

[Custom Installation]: The user can select and install

desired software.

The User License Agreement screen appears.

Installation starts.

Installing the Necessary Software

Insert the

etup CD-ROM included in the camera in

the disc drive on the computer.

After confirming that all other applications have been
closed, click the [

tart] menu > [My Computer].

Double-click the CD-ROM icon > [Applications] folder

> [VBToolsInstall.exe].

elect the installation method.

After selecting [Easy Installation], click [Next] and after
selecting [Custom Installation], select the checkboxes

of the software you want to install and click [Next].

Read through the user license agreement and click
[Yes] if you accept it.

Summary of Contents for VB-S30D MKII













































































































































































Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands

Canon VB-S30D MKII, Operation Manual

Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands