Canon VB-S30D MKII Operation Manual Download Page 66

Page: 66 / 172

(5) [Delete Certificate]

Deletes all installed CA certificates, client certificates,

and client private keys.

Only “CA Certificate” is displayed when [Authentication

Method] is set to [EAP-TTLS] or [EAP-PEAP], but any

installed client certificates and client private keys are also

deleted.

Important

• If any CA certificates, client certificates, and client private

keys already exist, they are discarded and new versions are
installed.

• An error occurs if the format of the certificate or private key to

be installed is incorrect.

• Client certificates and client private keys are checked as a

pair when installing, and an error occurs if they do not match.

• The certificate and private key used for 802.1X authentication

must be installed as separate items, irrespective of the

installation status of certificates for SSL/TLS.

Summary of Contents for VB-S30D MKII













































































































































































Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands

Canon VB-S30D MKII, Operation Manual

Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands