Test Flash / Modeling Flash from a Receiver Unit
During radio transmission wireless shooting, test flash and modeling flash (
performed from the EL-1 set as the receiver unit.
1.
Push the joystick vertically.
2.
Fire the flash.
[Test flash firing]
Press the joystick up, down, left, or right, or turn <
> and select
<
>, then press the joystick vertically.
[Modeling flash] (
Press the joystick up, down, left, or right, or turn <
> and select
<
>, then press the joystick vertically.
A flash signal is sent from the receiver unit to the sender unit, and a
wireless system test flash or modeling flash is fired.
150