8.
Take the picture.
Check that the <
> lamp of the sender unit is lit in green and
take the picture.
The receiver camera units are released with the release of the sender
camera unit.
Receiver units for which linked shooting has been performed are
indicated by a <
> on the LCD panel.
Note
When you want to clear linked shooting, operate the Speedlites one by one to
change the setting to <
> in step 1.
You can use this function as a remote control for linked shooting without attaching
a Speedlite to a camera. After pushing the joystick of the sender unit vertically,
push the joystick up / down / left / right or turn <
> to select <
> and
release all the receiver camera units.
During linked shooting, the time until auto power off takes effect is approx. 5 min.
for both the sender and the receiver units. When the interval of linked shooting is 5
min. or longer, set the "Auto power off" to "OFF" on both the sender and the
receiver units (
).
When P.Fn-06-0 is set (
), the beep will sound on each fully charged flash unit
(sender / receiver).
157
