manualshive.com logo in svg

Canon SPEEDLITE EL-1, Advanced User'S Manual, Page: 202 / 232

Share
Download
Canon SPEEDLITE EL-1 Advanced User'S Manual Download Page 202

Settings that can be changed with Custom Functions

C.Fn-00: 

 (Distance indicator display)

You can select meters or feet for the distance indicator display on the LCD panel.

0: m (Meters (m))

1: ft (Feet (ft))

Note

When the effective flash distance exceeds 18 m / 60 ft., the right end of the
effective flash range on the LCD panel changes to < >.

C.Fn-01:   (Auto power off)

When the Speedlite is not operated for approx. 90 seconds, the power turns off
automatically to save energy. You can disable this function.

0: ON

1: OFF

Note

During sender flash photography (

) in radio transmission wireless shooting or

during linked shooting (

), the time until auto power off takes effect is approx. 5

min.

C.Fn-02: 

 (Modeling flash)

0: 

 (Enable: Depth-of-field preview button)

Press the camera's depth-of-field preview button to fire the modeling flash.

1:   (Enable: Test flash button)

Press the Speedlite's test flash button to fire the modeling flash.

2: 

 (Enable with both buttons)

Press the camera's depth-of-field preview button or the Speedlite's test flash button to
fire the modeling flash.

3: OFF (Disabled)

Disables the modeling flash.

202

Summary of Contents for SPEEDLITE EL-1









































































































































































































































Reviews:

No comments