Canon SPEEDLITE EL-1 Advanced User'S Manual Download Page 139

Page: 139 / 232

Check transmission status and charging.

Check that <

> is not displayed on the sender unit's LCD panel.

Check that the <

> icon indicating that receiver charging is completed

is lit on the sender unit's LCD panel (<

> is not displayed).

For details of the LCD panel illumination of the sender unit, see "

About

the LCD Panel Illumination

Check that the sender unit's flash-ready lamp is lit.

Check the operation.

Press the sender unit's test flash button.

The Speedlite will fire. If it does not fire, check that it is placed within
the transmission range (

139

Summary of Contents for SPEEDLITE EL-1









































































































































































































































Search results

Summary of Contents for SPEEDLITE EL-1

Reviews:

Related manuals for SPEEDLITE EL-1

Brands by name

Popular brands

Canon SPEEDLITE EL-1, Advanced User'S Manual

Search results

Summary of Contents for SPEEDLITE EL-1

Reviews:

Related manuals for SPEEDLITE EL-1

Brands by name

Popular brands