Canon SPEEDLITE EL-1 Advanced User'S Manual Download

Page: 127 / 232

Check transmission status and charging.

Check that the <

> lamp is lit in green.

When the receiver flash is ready, the AF-assist beam emitter blinks at
approx. 1-second intervals.

When the sender unit is set to P.Fn-06-0 (

), the sender unit's beep

will sound when recharging of all flash units is completed.

Check that the <

> icon (1) is lit on the sender / receiver unit's LCD

panel (<

> is not displayed).

For details of the LCD panel illumination of the sender, refer to

About

the LCD Panel Illumination

Check that the sender unit's flash-ready lamp is lit.

127

Summary of Contents for SPEEDLITE EL-1









































































































































































































































Search results

Summary of Contents for SPEEDLITE EL-1

Reviews:

Related manuals for SPEEDLITE EL-1

Brands by name

Popular brands

Canon SPEEDLITE EL-1, Advanced User'S Manual

Search results

Summary of Contents for SPEEDLITE EL-1

Reviews:

Related manuals for SPEEDLITE EL-1

Brands by name

Popular brands