Pulsar CHROMABEAM66, Manual

Page: 1 / 8

Pulsar Light of Cambridge Limited, 3 Coldhams Business Park, Cambridge, CB1 3LH UK Tel: +44 (0)1223 403500 sales@pulsarlight.com www.pulsarlight.com
7627 CBEAM66 and CFLD66(100)R Instructions
Item Code: Item Code: Item Code: Item Code: CBEAM66[T] - [F][B]
Options:
Options: Options: Options: [T] - LED Type: TC, RGB, VW, SC, UV
Options: Options: Options: Options: [F] - Body Finish: B B B Black, S S S Silver, W W W White, Custom
Options:
Options: Options:
Options: [B] - Beam Angle: 5
Item Code: Item Code: Item Code: Item Code: CFLD[W]R[T] - [F][B]
Options:
Options: Options: Options: [W] - Mains Power: 66 or 100W
Options:
Options: Options:
Options: [T] - LED Type: TC, RGB, VW, SC, UV
Options:
Options: Options:
Options: [F] - Body Finish: B
B B
Black, S
S S
Silver, W
W W
White, Custom
Options: Options: Options: Options: [B] - Beam Angle: 8, 25, 45, 10x35, 10x 90, 90
The Chroma
Chroma Chroma
ChromaBeam66
Beam66 Beam66
Beam66 and Chroma
Chroma Chroma
ChromaFlood66
Flood66 Flood66
Flood66////100R
100R 100R
100R contain state of the art,
high brightness, high efficiency Red, Green and Blue LEDs. These three
primary colours can be mixed together to make an incredible palette of
16.7 million colours.
They are IP66 rated fixtures and therefore suitable for outdoor or indoor
use. They are powered directly from 85-277 Volts AC and have full remote
DMX control of RGB levels or can function in Stand Alone Mode.
Numerous chases and sequences are built in, enabling superb lighting
effects without complicated programming.
These impressive fixtures are ideal for the architectural and entertainment
markets to give an unlimited colour palette that can enhance building
facades, water features and focal displays or to providing stunning
dynamic colour in shows, conferences, concerts and themed
environments.
The Chroma
Chroma Chroma ChromaBeam66 Beam66 Beam66 Beam66 and Chroma Chroma Chroma ChromaFlood66/ Flood66/ Flood66/ Flood66/100R 100R 100R 100R contain PULSAR PULSAR PULSAR PULSAR
ChromaZone ChromaZone ChromaZone ChromaZone controllers.
The DMX Start Address and ChromaZone functions of each unit may be
set up using the internal User
User User
User Interface Module
Interface Module Interface Module
Interface Module (UIM) or remotely from a
controller using a digital DMX DMX DMX DMX (D D D Digital M M M MultipleX X X X) signal....
Please see the
Channel Ass
Channel Ass Channel Ass
Channel Assignments Tables
ignments Tables ignments Tables
ignments Tables sheet for details of the
different modes.
The Chroma
Chroma Chroma ChromaBeam66 Beam66 Beam66 Beam66 and Chroma Chroma Chroma ChromaFlood66/100R Flood66/100R Flood66/100R Flood66/100R have numerous chases
and effects built in, making it possible to achieve fantastic effects without
programming. These internal effects can be pre-selected with the User
User User
User
Interface Module Interface Module Interface Module Interface Module (UIM) for use in Stand Alone mode, or from a controller
using a digital DMX
DMX DMX DMX (D D D Digital M M M MultipleX X X X) signal.
Please see the Menu Selection Overview Menu Selection Overview Menu Selection Overview Menu Selection Overview sheet for a pictorial
representation of the menu functions.
The Chroma
Chroma Chroma ChromaBeam66 Beam66 Beam66 Beam66 and Chr Chr Chr Chroma oma oma omaFlood66/100R Flood66/100R Flood66/100R Flood66/100R have mounting brackets
making them ideal for floor, wall, ceiling or rig mounting.
The ChromaFlood
ChromaFlood ChromaFlood ChromaFlood100R 100R 100R 100R pictured at the top of this page shows the
mounting brackets arranged for floor mounting.
The Chroma
Chroma Chroma
ChromaBeam66
Beam66 Beam66
Beam66 and Chroma
Chroma Chroma
ChromaFlood66/100R
Flood66/100R Flood66/100R
Flood66/100R have a colour code letter.
This signifies the finished colour of the fixture (B = Black, S = Silver,
W=White)
Custom colours are available – please discuss with Pulsar if required.
The Chroma
Chroma Chroma
ChromaBeam66
Beam66 Beam66
Beam66 and Chroma
Chroma Chroma
ChromaFlood66/100R
Flood66/100R Flood66/100R
Flood66/100R have a thermal
management system. This progressively reduces the power to the LEDs if
the internal temperature exceeds limits set by the software.
Excess temperature will occur if the units are exposed to high ambient
temperatures or inadvertently covered. It is therefore important for
maximum performance that they have good ventilation on all sides.
Operating temperature range:
Operating temperature range: Operating temperature range: Operating temperature range: -20 O C to +50 O C
The lenses shipped with the Chroma
Chroma Chroma
ChromaBeam66
Beam66 Beam66
Beam66 and Chroma
Chroma Chroma
ChromaFlood66/100R
Flood66/100R Flood66/100R
Flood66/100R
may be easily changed. Currently 5 degree lenses for the ChromaBeam ChromaBeam ChromaBeam ChromaBeam66 66 66 66,
and 8, 25, 45, 10x35 (elliptical), 10x90 (elliptical), and 90 (no lens) lens plates
are available for the ChromaFlood
ChromaFlood ChromaFlood ChromaFlood66/100R 66/100R 66/100R 66/100R.
Other lenses may become available, please contact Pulsar Pulsar Pulsar Pulsar or see
www.pulsarlight.com for details
NB
NB NB NB ---- Patents applied for Patents applied for Patents applied for Patents applied for
Mains Supply Mains Supply Mains Supply Mains Supply - The C C C Chroma hroma hroma hromaBeam66 Beam66 Beam66 Beam66 and Chroma Chroma Chroma ChromaFlood66/100R Flood66/100R Flood66/100R Flood66/100R work
correctly on any mains voltage from 85-277 VAC, 50-60Hz, (self adjusting).
Power consumption is 66 (100) Watts max.
A 5m, bare ended, mains cable is provided. The bare end of the cable
should be fitted with a suitably approved and rated mains plug. Note: in
some countries it is a requirement that such a plug be fitted by a qualified
electrician.
CABLE COLOURS CABLE COLOURS CABLE COLOURS CABLE COLOURS
Green/Yellow = Earth / Ground
Brown = Live / Phase / Hot
Blue = Neutral
WARNING WARNING WARNING WARNING ---- THIS APPLIANCE MUS THIS APPLIANCE MUS THIS APPLIANCE MUS THIS APPLIANCE MUST BE EARTHED T BE EARTHED T BE EARTHED T BE EARTHED
For safety we recommend the use of a Residual Current Circuit Breaker. An For safety we recommend the use of a Residual Current Circuit Breaker. An For safety we recommend the use of a Residual Current Circuit Breaker. An For safety we recommend the use of a Residual Current Circuit Breaker. An
RCCB MUST be used when powering a
RCCB MUST be used when powering a RCCB MUST be used when powering a
RCCB MUST be used when powering a ChromaBeam66 or
ChromaBeam66 or ChromaBeam66 or
ChromaBeam66 or
ChromaFlood66/100R ChromaFlood66/100R ChromaFlood66/100R ChromaFlood66/100R in wet environments. in wet environments. in wet environments. in wet environments.
DMX In/Thru 5 Pin XLR Connectors
DMX In/Thru 5 Pin XLR Connectors DMX In/Thru 5 Pin XLR Connectors
DMX In/Thru 5 Pin XLR Connectors
Digital Control Signals:
Digital Control Signals: Digital Control Signals:
Digital Control Signals: Two 5 pin XLR connectors on 5m cables (in/thru)
are provided. The pin connections of the sockets are:
DMX SIGNAL DMX SIGNAL DMX SIGNAL DMX SIGNAL
Pin 1 = Screen / Chassis Earth
Pin 2 = Signal ----
(Blue)
Pin 3 = + + + (White)
Pin 4 = no connection (Green)
Pin 5 = LVS (male only) (Red)
Wet / Damp Environme Wet / Damp Environme Wet / Damp Environme Wet / Damp Environment Use nt Use nt Use nt Use – these products are
IP66 rated. However, the cable connections
must
must must
must also be
contained in a dry, low humidity, environment as water and
vapour will travel inside the cables from the connection joints into the
fixture. A waterproof connection box, or properly fitted IP68 rated
connectors, are essential for cable connections in such environments.
Suitable connectors are available from Pulsar.
Failure to take these precautions invalidates the guarantee.
Failure to take these precautions invalidates the guarantee. Failure to take these precautions invalidates the guarantee. Failure to take these precautions invalidates the guarantee.
CHROMA CHROMA CHROMA CHROMABEAM66
CHROMA CHROMA CHROMA CHROMAFLOOD66/100R
SPECIFICATION
CONNECTIONS
WET/DAMP PRECAUTIONS