![background image](http://html.mh-extra.com/html/canon/re-350/re-350_control-interface-commands-manual_61032012.webp)
12
1.3.3 Procedure for Using the Control Knobs
[O
FF
-L
INE
] Mode
[O
N
-L
INE
] Mode
[N
OTIFICATION
] Mode
Mode
Meaning
Adjusting the value of each control knob.
The physical position of each control knob on the front panel is used to measure and
adjust it's respective value.
Setting the center target value for Auto-White Balance.
The physical position of the white balance control knob will be used as the center
value to measure and adjust the white balance.
Adjusting the value of each control knob.
The physical position of each control knob on the front panel will be disregarded
and the value of the “command data packet” from the
PC
will be used to measure
and adjust the control knob's respective value.
Setting the center target value for Auto-White Balance.
The control knob's physical position will be saved into the Auto-White Balance
position buffer when the
RE-350
shifts to [O
N
-L
INE
] Mode. If the
PC
gives the
proper command data to set the Auto-White Balance control knob's position, the
buffer data will be updated.
Adjusting the value of each control knob..
The physical position of each control knob on the front panel will be disregarded
and the value of the “command data packet” from the
PC
will be used to adjust the
control's respective value.
Setting the center target value for Auto-White Balance
The control knob's physical position will be saved into the Auto-White Balance
position buffer when the
RE-350
shifts to [O
N
-L
INE
] Mode. If the
PC
gives the
proper command data to set the Auto-White Balance control knob's position into
the buffer, the given data will be updated.
Note:
When the mode of the
RE-350
shifts from [O
N
-L
INE
] Mode or [N
OTIFICATION
] Mode to [O
FF
-L
INE
] Mode, the
center target value for Auto-White Balance will be changed from the value in the Auto-White Balance control knob
position buffer to the physical position of the Auto-White Balance control knob automatically. The manual white
balance data given from the
PC
will be disregarded.
Summary of Contents for RE-350
Page 1: ...1 RE 350 Control Interface Commands RE 350 Video Visualizer VISUAL COMMUNICATION SYSTEMS v1 0 ...
Page 55: ...55 5 1 RS 232C Control Cable Pin Assignment 5 0 Control Cable Pin Assignments RE 350 RE 350 ...
Page 56: ...56 RE 350 Control Cable Pin Assignments 9 Pin DSUB RS 232C RE 350 RE 350 ...