![background image](http://html.mh-extra.com/html/canon/re-350/re-350_control-interface-commands-manual_61032033.webp)
33
Header
ID number
Command Parameter MSH Parameter LSH
$10 $ 8 *
$ 2 0 $ 0 0 $ 0 0
OP AWB (Operate Auto-White Balance)
• Function:
Instructs the auto white balance to find the best white balance.
• Timing of the “C-response Packet” sent to the PC:
Right after having found out the best white balance point or, after 6 seconds, having failed to find a proper
WB
.
• The parameter of the “C-response Packet”:
$0000 fixed
• The maximum operation time (msec):
7000 millisecond
• Command format:
$10 $ 8 *
$2 2 $ 0 0 $ * *
White Balance: Manual Access To
• Function:
Sets a designated white balance position, which is determined by the parameter of this command, based on the Auto
White Balance value as returned by the <Status of
AWB
Result> command (p.
51
). The
AWB
value should be known
so the adjustment can be made properly, in the correct direction. This command is similar to rotating the manual
control knob on the front panel. Note: The control knob’s physical position is not updated by this command.
• Available parameter value:
LSH: $ 00 ~ $ FF
• Timing of the “C-response Packet” sent to the PC:
Right after the compensation of
WB
is performed.
• The parameter of the “C-response Packet”:
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header
ID number
Command Parameter MSH Parameter LSH
3.3 White Balance Commands
Summary of Contents for RE-350
Page 1: ...1 RE 350 Control Interface Commands RE 350 Video Visualizer VISUAL COMMUNICATION SYSTEMS v1 0 ...
Page 55: ...55 5 1 RS 232C Control Cable Pin Assignment 5 0 Control Cable Pin Assignments RE 350 RE 350 ...
Page 56: ...56 RE 350 Control Cable Pin Assignments 9 Pin DSUB RS 232C RE 350 RE 350 ...