41
LED: Normal
• Function:
The
LED
indicated by the parameter data will be set to normal operation. This command is available in the
[N
OTIFICATION
] Mode. If the
RE-350
receives this command from the
PC
in another mode, the
RE-350
will send a
“C-response Packet” with the Mode Error response.
• The available parameter value:
LSH: $00 ~ $FF
• Timing of the “C-response Packet” sent to the PC:
Right after this setting is done.
• The parameter of the “C-response Packet”:
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header
ID number
Command Parameter MSH Parameter LSH
$10 $ 8 *
$ 6 8 $ * * $ 0 0
RS-232 Input select NEGA WB Auto B/W Focus Auto Lights Backlight
D15 D14 D13 D12 D11 D10 D9 D8
• The bit assignment for the parameter data:
Each bit corresponds to each
LED
on the operation panel.
Summary of Contents for RE-350
Page 1: ...1 RE 350 Control Interface Commands RE 350 Video Visualizer VISUAL COMMUNICATION SYSTEMS v1 0 ...
Page 55: ...55 5 1 RS 232C Control Cable Pin Assignment 5 0 Control Cable Pin Assignments RE 350 RE 350 ...
Page 56: ...56 RE 350 Control Cable Pin Assignments 9 Pin DSUB RS 232C RE 350 RE 350 ...