manualshive.com logo in svg

Canon PowerShot S400 Digital Elph, User Manual

Share
Download
Canon PowerShot S400 Digital Elph User Manual Download Page 343

343

Troubleshooting

An Error Message Appears

■  

Error writing to LPT1 or USBPRN  

You cannot print when this message appears.

Check 1

I

S

 

THE

 

PRINTER

 

TURNED

 

ON

?

Check the POWER light to see if it is green.

If the POWER light flashes green, the printer is warming up.

After the POWER light is on, the printer is ready to use.

Check 2

A

RE

 

THE

 

PRINTER

 

AND

 

COMPUTER

 

CONNECTED

 

PROPERLY

?

Check the connections of the printer cable at the computer and the printer.

Check 3

I

S

 

PRINT

 

SPOOLING

 

OPERATING

 

CORRECTLY

?

Cancel spooling and send the print job directly to the printer. 

Open the Printer Properties dialog box from the Start menu: click Start, 
select Settings, and click Printers. Highlight the Canon S400 icon and right-
click. Select Properties.

Click the Details tab and click the Spool Settings button. Click the button for 
“Print directly to the printer.”

Windows

1

2

S400.book  Page 343  Wednesday, August 16, 2000  12:02 AM

Summary of Contents for PowerShot S400 Digital Elph



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands