manualshive.com logo in svg

Canon PowerShot S400 Digital Elph, User Manual

Share
Download
Canon PowerShot S400 Digital Elph User Manual Download Page 20

 

20

Introduction

Safety Precautions

 

Do not subject BJ cartridges or BJ tanks to shocks or excessive vibration.

This could cause the ink to leak out and stain your clothing or the 
surroundings.

Do not touch the metal contacts on a BJ cartridge after printing.

The metal parts may be very hot and could cause burns.

 

■  

 

Using the printer near appliances such as fluorescent lamps

 

Allow at least 6 inches (approximately 15 cm) clearance between the printer and an 
appliance such as a fluorescent lamp. Electrical noise generated by a fluorescent lamp 
placed too close to the printer may cause printer malfunctions.

 

S400.book  Page 20  Wednesday, August 16, 2000  12:02 AM

Summary of Contents for PowerShot S400 Digital Elph



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands