manualshive.com logo in svg

Canon PowerShot S400 Digital Elph, User Manual

Share
Download
Canon PowerShot S400 Digital Elph User Manual Download Page 301

301

Troubleshooting

Printout Is Unsatisfactory

You may also want to click the Advanced button in the Main tab. Click the 
Color tab, check that Color Adjustment is enabled, and then adjust the 
Color settings such as Color Balance, Output Style, and Brightness.

Select the Color panel and change the settings such as the Matching 
Method.

Check 3

I

S

 

A

 

RE

-

FILLED

 BJ 

TANK

 

INSTALLED

 

IN

 

THE

 BJ 

CARTRIDGE

?

You may not be able to achieve satisfactory performance with a BJ tank 
that does not contain genuine Canon ink. It is recommended that you 
use genuine Canon BJ tanks especially designed for use with the Canon 
BJ cartridges.

 

Replacing a BJ Tank

Note

Windows

Macintosh

S400.book  Page 301  Wednesday, August 16, 2000  12:02 AM

Summary of Contents for PowerShot S400 Digital Elph



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands