manualshive.com logo in svg

Canon PowerShot S400 Digital Elph, User Manual

Share
Download
Canon PowerShot S400 Digital Elph User Manual Download Page 310

310

Troubleshooting

Printout Is Unsatisfactory

Check 3

I

S

 

THE

 

PAPER

 

THICKNESS

 

LEVER

 

SET

 

CORRECTLY

?

If straight lines are printed uneven or broken after changing the setting of 
the paper thickness lever on the front of the printer, re-align the print heads.

 Setting the Paper Thickness Lever

 Aligning the Print Head

■  

Printed pages curled

As printed pages are ejected from the printer, they are curled or wavy.

Check 1

A

RE

 

YOU

 

PRINTING

 

ON

 

THIN

 

PAPER

?

The large amount of ink used to print color photographs and illustrations 
can cause printed pages to curl or warp.

For such cases, be sure to use special media such as High Resolution 
Paper or Glossy Photo Paper.

When you use High Resolution Paper, Glossy Photo Paper, or other special 
media, always load the pages with the print side (whiter side) facing up. 
Only one side of these media is treated with a special coating for better ink 
absorption.

Check 2

I

S

 

THE

 

PRINTER

 

DRIVER

 

SET

 

FOR

 

HIGH

 

DENSITY

 

PRINTING

?

Move the Intensity setting (print density) in the Color tab to a lower setting 
and execute the print job again. A lower Intensity setting uses less ink and 
thus causes less curling of the printed page. 

Note

S400.book  Page 310  Wednesday, August 16, 2000  12:02 AM

Summary of Contents for PowerShot S400 Digital Elph



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands