manualshive.com logo in svg

Canon PowerShot S400 Digital Elph, User Manual

Share
Download
Canon PowerShot S400 Digital Elph User Manual Download Page 236

236

Using the Macintosh Printer Driver

Executing Special Functions

Type in the name under which you want to register the settings and then 
click the OK button.

You return to the Register Settings dialog box.

Click the Close button.

You return to the Print dialog box.

You cannot specify a name that is already being used for a set of print 
mode settings. Use a different name, or remove the settings with that name 
before you register the new settings. 

Importing registered print setting

You can read in a previously registered print mode and set it as the Print dialog box for the 

icon.

Open the Print dialog box and click the Apply... button.

The Register Settings dialog box is displayed.

4

5

Note

1

S400.book  Page 236  Wednesday, August 16, 2000  12:02 AM

Summary of Contents for PowerShot S400 Digital Elph



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands