Canon PIXMA TS5000 Series Online Manual Download Page 80

Page: 80 / 441

The confirmation screen will appear.

7. Select

Yes

The printer starts cleaning the print head deeply.

Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.

The pattern print confirmation screen will appear.

8. Select

Yes

The nozzle check pattern will be printed.

9. When the completion message appears, select

10.

Examine the nozzle check pattern

If a particular color is not printed properly,

replace the ink tank

of that color.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.

If the problem is still not resolved, the print head may be damaged. Contact the service center.

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA TS5000 Series, Online Manual

Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands