manualshive.com logo in svg

Canon PIXMA TS5000 Series, Online Manual

Share
Download
Canon PIXMA TS5000 Series Online Manual Download Page 170

Paper other than Genuine Canon Paper

Common Name

Rear Tray

Paper Output

Tray

Plain Paper (including recycled paper)

*1

Approx. 100 sheets (10 sheets: Legal) Approx. 50

sheets (10
sheets: Legal)

Envelopes

10 envelopes

*3

T-Shirt Transfers

1 sheet : A4

*3

*1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high
or low temperature or humidity. In this case, load half the amount of paper or less.
*2 Feeding from a loaded stack of paper may leave marks on the printed side or prevent efficient feeding.
In this case, load one sheet at a time.
*3 For best results in continuous printing, remove printed paper or envelopes from the paper output tray to
avoid smearing or discoloration.

170

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands