Canon optura10 Instruction Manual Download

Page: 72 / 163

Using the Full Range

of Featur

Using the VFL-1 Video Flash Light (Optional)

The VFL-1 Video Flash Light allows you to record still images and movies even at night

or in dark places. This video flash light attaches to the camcorder’s

advanced

accessory shoe for cable-free operation and is powered by the camcorder’s power

supply.

Using it as video light, you can set it to turn on and off automatically according to the

surrounding brightness. Using it as flash, you can set it to fire automatically according

to the brightness of the subject and the settings of the camcorder, or to fire a pre-

flash to reduce the red-eye effect.

Refer also to the VFL-1 Video Flash Light instruction manual.

❍

Always turn off the camcorder before attaching/removing the video flash light.

❍

Do not carry the camcorder by the video flash light.

Attaching the Video Flash Light

1. Remove the accessory shoe cover.

2. Slide the video flash light into the

accessory shoe until it clicks.

3. Tighten the shoe lock.

Be careful that the video flash light does not

come off when tightening the shoe lock.

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands