Canon optura10 Instruction Manual Download

Page: 62 / 163

Using the Full Range

of Featur

Selecting a Fader

1. In CAMERA mode, set the program selector to

2. Press the DIGITAL EFFECTS button.

[D.EFFECTS

], [FADER], [EFFECT] and [MULTI-S] appear.

3. Select [FADER].

4. Select the fader option.

5. Press the DIGITAL EFFECTS button.

The name of the selected fader flashes.

CAMERA mode:

6. Fade in: In record pause mode, press the ON/OFF

button and begin recording by pressing the
start/stop button.
Fade out: During recording, press the ON/OFF button
and pause recording by pressing the start/stop button.

The fader can be activated/deactivated by pressing the ON/OFF button.

PLAY (VCR) mode:

6. Fade in: In playback pause mode, press the ON/OFF

button and begin playback by pressing the

button.
Fade out: During playback, press the ON/OFF button
and pause playback by pressing the

button.

The fader can be activated/deactivated by pressing the ON/OFF button.

Faders cannot be selected when Card Mix is activated.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands