Canon optura10 Instruction Manual Download

Page: 133 / 163

133

Using a Memory Car

Copying Still Images from Memory Card to Tape

Load a cassette with enough free space, and insert a recorded memory card. Make

sure that the protect tab on the cassette is set to allow recording.

1. Select the first still image you wish to copy with the

CARD +/– buttons.

To copy all still images from the memory card, select the first still

image.

2. Open the menu and select [CARD OPERATIONS].

3. Select [COPY [

] ].

[CANCEL] and [EXECUTE] appears.

4. Select [EXECUTE].

• “NOW COPYING” appears.

• It takes about 6 seconds per still image to be copied to the tape.

• Copying stops when all still images are copied or the tape is full.

5. Press the

(stop) button to end copying.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

COPY

CARD OPERATIONS

[ ]

(

43)

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands