Canon optura10 Instruction Manual Download

Page: 116 / 163

116

Using a Memory Car

Index Screen

1. In single image display, press the INDEX SCREEN

button.

• Up to 6 images appear.

• Movies are displayed with the first scene as a still image

indicated by “

”.

2. Press the CARD +/– button to change the image

selection.

3. Move the

mark to the image you wish to view.

• Turn the selector dial up to move to the next image and down

to move to the previous image.

• Turning the selector dial up on the last image displays the next

index screen. Turning the selector dial down on the first image

displays the previous index screen.

4. Press the INDEX SCREEN button.

The index screen is canceled and the selected image appears in

single image display.

Slide Show

1. In single image display, press the SLIDE SHOW

button.

Images are played back one after another.

2. Press the SLIDE SHOW button to stop the slide show.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands