Canon optura10 Instruction Manual Download

Page: 20 / 163

Mastering

the Basics

Preparing the Camcorder

Adjusting the Viewfinder (Diopter Adjustment)

1. Turn on the camcorder and keep the

LCD panel closed to adjust the
viewfinder.

2. Adjust the diopter adjustment lever.

Do not leave the viewfinder exposed to direct sunlight as it may melt (due to
concentration of light by the lens). Adjust the angle of the viewfinder to prevent
sunlight from entering.

Attaching the Lens Cap

1. Attach the cord to the lens cap.

2. Pass the grip belt through the loop

on the cord.

Press the buttons on the lens cap when

attaching/removing it. Hook the lens cap on

the grip belt while you are recording, and

place it over the lens when you have finished.

Fastening the Grip Belt

Hold the camcorder with your right
hand and adjust the belt with your left.

Adjust the grip belt so that you can reach the

zoom lever and photo button with your index

finger, and the start/stop button with your

thumb.

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands