Canon optura10 Instruction Manual Download

Page: 15 / 163

Mastering

the Basics

Using a Household Power Source

You can operate the camcorder from a household power source using the supplied

power adapter. The power adapter converts current from a power outlet (100-240 V

AC, 50/60 Hz) to the DC current used by the camcorder.

1. Turn the POWER switch to OFF.

2. Connect the power cord to the

power adapter.

3. Plug the power cord into a power

outlet.

4. Connect the power adapter to the

camcorder’s DC IN terminal.

5. After use, turn off the camcorder and disconnect the power adapter

from the camcorder. Unplug the power cord from the power outlet and
disconnect it from the adapter.

❍

Turn off the camcorder before connecting or disconnecting the power adapter.

❍

If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.

❍

Do not connect any products that are not expressly recommended to the
camcorder’s DC IN terminal or to the power adapter.

❍

You may hear some noise from the power adapter during use. This is not a
malfunction.

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands