Canon optura10 Instruction Manual Download

Page: 70 / 163

Using the Full Range

of Featur

❍

Low sound may be reduced together with the wind noise. We recommend
turning off the wind screen for normal recordings.

❍

The wind screen function cannot be turned on/off during recording.

❍

The wind screen function can also be used for audio dubbing (when [AUDIO
DUB.] is set to [MIC. IN] in the [AUDIO SET UP] submenu).

❍

The wind screen function cannot be used when an external microphone is
connected to the MIC terminal or when the DM-50 Microphone is attached to
the advanced accessory shoe.

Using Headphones during Recording

You can use headphones to monitor the sound during recording.

When using headphones, make sure that “

” is displayed. If “

” is not displayed

change the setting following the procedure below.

Switching the AV/Headphones Terminal

Open the menu and select [VCR SET UP]. Select [AV/PHONES], set it to [AV]
or [PHONES

] and close the menu.

Adjusting the Headphone Volume

Open the menu and select [AUDIO SET UP]. Select [

VOLUME], adjust

the volume with the selector dial and close the menu.

You can turn off the volume completely by turning the selector dial down until [OFF]

appears. Turn the selector dial up to increase the volume again.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

AV/PHONES••••AV

VCR SET UP

(

43)

VOLUME•••••

AUDIO SET UP

(

43)

Summary of Contents for optura10




































































































































































Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands

Canon optura10, Instruction Manual

Search results

Summary of Contents for optura10

Reviews:

Related manuals for optura10

Brands by name

Popular brands