Canon OMNERA 400T, Operator'S Manual

Page: 116 / 166

OMNERA® 0180-095-418-EN Rev. 6.1
Operator´s Manual
Page 108 2020-09-18
4.5.2.5 Detector, detector holder and grid
Tiltable detector holder (option)
The wallstand has an optional tiltable detector holder wagon. The wagon can make it possi-
ble to tilt the detector holder from -20° +90°. See index positions in the figure below
20
°
90
°
- 20°
0° 90°
Fig. 4-20 Index positions
Tilt the detector holder
Turn the handle (1) up to unlock the tiltable detector holder according to picture B in figure
below. Push the detector holder up in right position and then turn the handle down to lock the
holder, see picture C in the figure below.
1
A C B
Fig. 4-21 Tilting detector holder
Start position of the handle
CAUTION!
Squeezing hazards:
between the detector holder and other parts or devices when adjusting the angle of
the detector holder.
for fingers when operating the detector.
for arm and fingers when operating the detector holder
To position the handle (See pos.1 in Fig. 4-21 Tilting detector holder , in its start position);
1. Drag the handle out from the wagon
Operating the system
Operating the Wall Stand