Canon Oce TDS Series, Administration Manual

Page: 53 / 138

IPv6 for Océ TDS/TCS/TC4 systems
Introduction
The IPv6 implementation described in this section applies to the following Océ print systems:
• Océ TDS450
Océ TDS7x0
• Océ TCS300
Océ TCS500
• Océ TC4
Find below a description of this implementation:
• the settings
• the related features
• the limitations
IPv6 available settings
The IPv6 settings are located on the print controller (Océ Express WebTools or Océ Settings
Editor, according to the printer model), generally under the 'Connectivity' tab.
Possible definitions:
• IPv6 setting: enable / disable
• IPv6 manual address
• IPv6 manual gateway address
• IPv6 link local address (not changeable)
• IPV6 stateless address (not changeable)
Features related with IPv6
The next table shows the features available in relation with the IPv6 settings.
Feature Description
IPv6 addresses • Link local addresses (fe80:…): this address is determined automati-
cally and cannot be changed, it can be used for local network only,
since it is not routable.
• Stateless autoconfigured addresses (Router advertisement): this ad-
dress is determined automatically and cannot be changed. It is rout-
able.
• IPv6 manual address (Global unicast address)
• IPv6 manual gateway address
Protocols supported
by the system • Print: FTP, LPR, HTTP, HTTPS
Compatibility with
WPD printer discovery • From WPD 1.19.2
• All versions of WPD2
Compatibility with Se-
curity levels • High
• Medium
• Normal
Limitations
• A pure IPv6 network is not supported (only IPv6 + IPv4; e.g. DNS).
• The DHCPv6 protocol is not supported.
IPv6 for Océ TDS/TCS/TC4 systems
Chapter 2 - Configure the print system controller 53
Océ TDS/TCS/TC Connectivity information for Windows environments