Canon Oce TDS Series, Administration Manual

Page: 23 / 138

Get to know the type of TCP/IP network
When to do
The next procedure applies to the Océ TCS300.
Procedure
1. Get an IP address assigned by DHCP.
To do so, refer to the procedure in the next table.
How to get the IP address with the Printer Control Panel (Océ TCS300)
Step Océ TCS300
1 From the User Panel, select ‘Configure System’ - ‘Next’ - Network settings adapter 1’-
‘Next’.
2 Click ‘Edit’ to start the Wizard.
3 Select:
• 'Use DHCP for adapter 1' -'Yes'
• 'Use DHCP for default gateway' -'Yes'
• 'Use DHCP for DNS' -'Yes'
• 'Use DHCP for Wins' -'Yes'
Click 'Apply'.
4 Wait until the network settings are acquired. Then finish the Wizard.
5 Restart the printer.
6 Repeat step 1.
7 Check the IP address.
2.
Check the type of network according to the IP address:
If the IP address Then
is NOT within the
[169.254.1.0 -
169.254.254.255] range It is a configuration by DHCP.
Make sure it matches with the DHCP reservation. If not, contact
the network administrator.
See:
Automatic network configuration by DHCP on page 24
is WITHIN the [169.254.1.0 -
169.254.254.255] range You probably need a configuration with a fixed IP address.
Make sure you know all the TCP/IP parameters.
See:
Manual configuration with a fixed IP address on page 28
3. Cancel the Wizard without changing any network setting.
4. Click 'Close'.
Get to know the type of TCP/IP network
Chapter 2 - Configure the print system controller 23
Océ TDS/TCS/TC Connectivity information for Windows environments