Canon Oce TDS Series, Administration Manual

Page: 28 / 138

Manual network configuration with a fixed IP address
Introduction
Your network type requires a manual configuration of the print system with a fixed IP address.
Refer to the next table in order to locate the procedure that applies to your printing system.
Reference
If your printer is an Then refer to the procedure
Océ TCS300
Configure the TCP/IP settings (Océ TCS300 systems):
manual network configuration with a fixed IP-address on
page 28
Océ TDS/TCS (except TCS300)
Configure the TCP/IP settings in a network configuration
with a fixed IP-address (Océ TDS/TCS systems -except
TCS300) on page 30
Configure the TCP/IP settings (Océ TCS300 systems): manual network
configuration with a fixed IP-address
When to do
The next procedure applies to the Océ TCS300. For the other print systems, refer to the dedicated
procedures provided in the next sections.
Before you begin
Make sure you know the IP address assigned to the Océ printer.
Make sure the print system is connected to the network and powered on.
Configure basic TCP/IP settings from the user panel of the printer
Step Océ TCS300
1 From the user Panel, select 'Configure System' - 'Next' - Network settings adapter 1'-
'Next'.
2 Click 'Edit' to start the Wizard.
3 Select 'Use DHCP for adapter 1', then 'No'.
4 Configure the following TCP/IP (IPv4) settings:
• IP address of the printer
• Subnet mask
• Default gateway
If needed, configure
• IP address of the DNS server
• IP address of the WINS server
5 Click 'Apply'.
6 Restart the printer.
Manual network configuration with a fixed IP address
28 Chapter 2 - Configure the print system controller
Océ TDS/TCS/TC Connectivity information for Windows environments