manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 86

4. Install the printer driver: [Express installation]

NOTE

In a Peer to peer architecture, do not share the printer driver on a workstation.

In the step 2 of the below procedures, select 'No'.

Procedure

1.

The Océ Connect Assistant is launched. It connects to the printer controller in order to retrieve the
printer model and the printer information.
When detected, the printer model is displayed. Else, select your printer model from the list.

NOTE

When you select the printer model from the list, there is no back-channel performed
during the installation.

Click [Next].

2.

Type a name for the new printer (see 

Caution concerning the printer names on page 82

).

Check 'No' when you are requested to share the printer driver.

[15] Printer information

Click [Install].
The [Installation Wizard] performs the driver installation and configuration.

3.

Once the driver is installed, click [Your printing defaults] to define the default values for your print
settings.
Then, you can:
• Verify the options of your printer, in the absence of back-channel ([Your printer options])
• [Print a test page]
• [Open Océ Express WebTools] to verify the printer controller configuration
• [Install another printer] or exit the [Installation Wizard].

4. Install the printer driver: [Express installation]

86

Chapter 3 - Print via LPD/LPR

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands