Canon Oce TC Series Administration Manual Download Page 116

Page: 116 / 138

Information retrieved through SNMP from the Océ

compatible systems

The example below only describes the information retrieved through SNMP from an Océ TDS450
system.

SNMP enables you to retrieve the same information from:
• Océ TDS750

Only two topics from the Océ TDS450 v3.1 (and higher) can be retrieved through SNMP:
• hrDeviceId (OID 1.3.6.1.2.1.25.3.2.1.4)

TDS450 3.1 response is 1.3.6.4.4.1.1552.20.14.4.450

• SysDescr (OID1.3.6.1.2.1.1.1)

TDS450 3.1 response is

Oce_TDS450_R3.1.0_Power_Logic_Controller_R12_Network_Interface

NOTE

From Océ TDS450 3.4, the response to SysDescr only is

Oce TDS450 R3.4

Information retrieved through SNMP from the Océ compatible systems

116

Chapter 6 - Simple Network Management Protocol (SNMP)

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Search results

Summary of Contents for Oce TC Series

Reviews:

Brands by name

Popular brands

Canon Oce TC Series, Administration Manual

Search results

Summary of Contents for Oce TC Series

Reviews:

Brands by name

Popular brands