manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 39

Enable SMB protocol

Introduction

IMPORTANT

The following information and procedures do not address all the Océ TDS/TCS systems.

Indeed, the SMB settings configuration is not applicable to the Océ TCS500 v1.2 and higher, Océ

TCS300, Océ TDS7x0 and Océ TDS450 v3.1 and higher.

This section presents the list of the SMB functionalities, and the procedures to configure the SMB
settings.

SMB functionalities

Depending on the Océ print system and Océ PLC controller release, you can find the following
SMB functionality:

(2) SMB capabilities

Océ Print System

Océ TDS3x0
Océ TDS400
Océ TDS600
Océ TDS8x0
Océ TCS400

Océ TDS450 v3.0.x
Océ TCS500 v1.1.1

Océ TDS7x0
Océ TDS450 v3.1 and
higher
Océ TCS500 v1.2 and
higher
Océ TCS300

Functionality

SMB browsing

YES 

(1)

YES 

(2)

NO

SMB Point and Print

YES 

(1)

NO

NO

Limitations:
•

(1)

 For ‘Standard / Normal’ security level only.

•

(2)

 SMB browsing functionality is of limited interest as Point and Print is not available.

NOTE

You MUST be logged on as a system administrator.

Enable SMB printing protocol

Procedure

1.

Switch the Océ Settings Editor in SA Mode on page 128

.

2.

Select ‘Connectivity’ - 'SMB' - 'Enable SMB'

Enable SMB protocol

Chapter 2 - Configure the print system controller

39

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands