manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 25

Step

Action

4

Configure the TCP/IP (IPv4) settings as follows:
• make sure that ‘IP type’, when this setting is available, is set to ‘IPv4’
• make sure that 'DHCP' is enabled
• enable 'NetBIOS over TCP/IP', when this setting is available
• make sure the 'Link speed / Duplex mode' is set to the automatic value ('Auto Ne-

gotiation'), or to the 'Full duplex' value

• define the 'Primary DNS suffix' (if DNS is used in the network).

It is compulsory if you need to configure a Scan-to-File environment.
Example: <company.department.com>

5

Click 'OK' to save the settings.
You are proposed to restart the system. Do NOT restart the system now.

6

Go to the '(System) Identification' section.

7

Define the hostname.

NOTE

Make sure the hostname is unique within the network.

8

Click 'OK' to save the settings.

9

You are proposed to restart the system.
Use the ‘Power’ button located at the front of the printer to do so.

Configure the TCP/IP settings (Océ TCS300 ): automatic network configuration by DHCP

Chapter 2 - Configure the print system controller

25

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands