manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 33

Enable print protocols

Enable LPD/LPR protocol

Before you begin

•  You MUST be logged on as a system administrator.
• The LPD/LPR protocol is enabled by default on the Océ Wide-format printing systems. Make

sure it is enabled on your printing system.

Enable LPD protocol for Océ TDS/TCS systems (except Océ TDS7x0,

Océ TCS300)

Procedure

1.

Switch the Océ Settings Editor in SA Mode.

2.

Select ‘Connectivity’ - ‘LPD’ - ‘Enable LPD’.

3.

Select ‘Enabled’ on the right panel (‘Enable LPD’).

4.

Click ‘Apply'.
You are then proposed to reboot the controller.
Either, click ‘OK’ and go on with the other parameters setup, or, once all the setups are done,
reboot the controller.

Enable print protocols

Chapter 2 - Configure the print system controller

33

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands