manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 38

Enable FTP protocol for Océ TCS300

Procedure

1.

From a client workstation, open a web browser and access the Océ Express WebTools:
http://<IP-ADDRESS>
or
http://<printer HOSTNAME>

2.

In the ‘Configuration’ tab, select ‘Network’ (or 'Connectivity').

3.

In the ‘FTP’ section, click on 'Edit'.
The 'FTP' window pops up.

4.

Check the ‘FTP' setting box to enable the FTP protocol.

5.

Click ‘OK’ to validate the new value and close the window.
You are proposed to restart the controller.
Either, select 'Restart later' and go on with the other parameters setup; or, once all the setups are
done, restart the controller (select 'Restart now').

Enable FTP protocol for Océ TCS300

38

Chapter 2 - Configure the print system controller

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands