manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 43

Configure the Océ TDS/TCS system (except TDS7x0) for use with

Océ Remote Logic

NOTE

The procedures below only apply for Océ TDS/TCS systems equipped with a Graphical User

Interface.

Illustration

[1] Océ TDS/TCS system (except TDS7x0) configuration or use with Océ Remote Logic

Procedure

1.

From the Océ Settings Editor application on the printer controller, click ‘Edit’ and ‘Options’.
The ‘Options’ window opens.

2.

Check the ‘Host name’ field:

If the ‘Host name’ field

Then

is empty or 'Auto detected' the configuration of the Océ TDS/TCS system is correct for use

with Océ Remote Logic.

is not empty or 'Auto de-
tected'

1. Open the drop down list.
2. Select the empty line or 'Auto detected'.
3. Click 'OK'.
4. Restart the Océ TDS/TCS printer controller.

Configure the Océ TDS/TCS system (except TDS7x0) for use with Océ Remote Logic

Chapter 2 - Configure the print system controller

43

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands