6251-006 Rev. 2
-
2 / 6 -
No.
Item
Description
6
Changing the specifications
for the side deck unit LED
The specifications used to control the LED of the side deck have been
changed so that
LED ON:
Deck open and lifter motor off
LED OFF:
Deck closed and lifter motor off
(The LED is also off while the lifter motor is on during
copying operation.)
LED blinking:
Blinking while the lifter motor is on
7
Increasing the effective
area of buttons on the LCD
By way of preventing cracks in the LCD on the control panel, the area of
buttons within which a press is recognized has been increased:
"Reduce/Direct/Enlarge, Paper Select" on the standard screen (part of
Extended Functions mode) and "Close" on the Extended Functions Mode
screen.
8
Changing the notation of
Direct (100%) key
In previous versions, the notation used to represent 100% copying is
"DIRECT."
In version 8, the English ROM and Inch-configuration combination uses
the notation "DIRECT," while the English ROM and A-, AB-, or AB/Inch-
configuration combination uses the notation "1:1."
Other combinations use their appropriate language notations.
9
Complying with Energy
Star Tire2
The following changes have been made to comply with the requirements of
Energy Star Tire2:
1)
Default mode is now "from one-sided original to one-sided copy"
instead of "from one-sided original to two-sided copy."
However, default mode for Inch-configuration remains the same as
"from one-sided original to two-sided copy." The notation 2SIDE_SL in
service mode *5* is disabled and dimmed.
2)
New function which enables a switch-over to low-power consumption
mode has been added.
If no operation is initiated for a specific period of time after the end of a
job or a key operation, a switch-over is automatically made to low-
power consumption mode. An item has been added to user mode timer
settings to enable changing of the time after which a switch-over is
made to low-power consumption mode.
The time may be set between 10 min and 4 hr; in 5-min increments
between 10 and 20 min; in 10-min increments between 30 and 50 min;
in 30-min increments between 1 and 2 hr; 3 or 4 hr thereafter. Initially,
the time is set to 15 min.
3)
Changing the auto-power off time settings.
The range of time that may be set is now "between 10 min and 4 hr"
instead of "10 min and 24 hr."
The time may be set in 5-min increments between 10 and 20 min; in 10-
min increments between 30 and 50 min; and in 30-min increments
between 1 and 2 hr; and 3 or 4 hr between 3 and 4 hr.
